▷ Best Denso Oxygen Sensor Upstream 2023 ▷ Where to Buy? ▷ VitalSensorsTech.com

AP1822F 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side, Preventing Damage to Wires

In the following paragraphs, we are going to present the main specifics of denso oxygen sensor upstream. Purchasing a excellent denso oxygen sensor upstream entails analysis and to ensure making the proper choice, and we want to assist you to achieve this job with good results.

Table of Contents

1 What is the best denso oxygen sensor upstream to buy?
2 Best Denso Oxygen Sensor Upstream Reviews
3 Offers and Discounts
4 Cheap Denso Oxygen Sensor Upstream
5 Buy Denso Oxygen Sensor Upstream Online
6 Best Denso Oxygen Sensor Upstream 2024

Best Wideband O2 Sensor Kit

What is the best denso oxygen sensor upstream to buy?

This is basically the top rated choice of other clients getting items related to denso oxygen sensor upstream. For additional alternatives, check out our list of Denso Oxygen Sensor Upstream or use the search box.

You will hear what other people have to mention about using denso oxygen sensor upstream and the way it worked well to them. Keep reading to see the very best seller items and what other folks have to mention about them.

Best Denso Oxygen Sensor Upstream Reviews

Watch these video reviews to know more about denso oxygen sensor upstream and then make a well informed selection.

Click the right upper side icon to see more video suggestions.

Offers and Discounts

If you are looking for cheap Denso Oxygen Sensor Upstream, here we will post any offer that we find:

If there are no available offers right now, bookmark this page and come back later. Price and availability change quickly.

Buy Denso Oxygen Sensor Upstream Online

Best 1999 Nissan Pathfinder Knock Sensor

17,886 Reviews

Autel MS300 OBD2 Scanner Code Reader, Turn Off Check Engine Light, Read & Erase Fault Codes, Check Emission Monitor Status CAN Diagnostic Scan Tool

【For Car DIYers And Beginners】This plug-and-play Autel scanner MS300 can pay for itself in the first use. It communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly (no battery needed). It capable of scanning vehicle Diagnostic Trouble Codes (DTCs) in seconds to pinpoint emission-related issues. The little guy should be a member of your toolbox, always in your car and ready to be taken out and used.
【Read Codes & Clear Codes In Seconds】Getting diagnostic codes(DTCs) should be the start of all repairs if you don't want to be ripped off. You can use MS300 to read the codes in seconds and look them up to quickly locate the problem areas, then determine if you can do the repair yourself or go to a mechanic, and clear the codes to get everything back to normal.
【Turn Off Check Engine Light】The check engine light is always annoying you, most of the time because of a little thing, isn't it? Maybe it's just a gas cap that's not tightened but you paid hundreds of dollars for it? With Autel MS300 scan tool, you can read code to quickly find out why the check engine light is on and reset it.
【Help You Pass Annual Smog Check】To pass annual smog check, you are better to make the OBD II Readiness Monitors on your car “Ready”. You don’t want to pay for a failed smoke check. MS300 OBD2 scanner can retrieve I/M Readiness status to check the monitors like misfire, fuel system, catalyst, O2 sensors, EVAP, etc, to help your car ready pass the annual smog check.
【Works On 99% Vehicles & No-Worry Purchase】Autel MaxiScan MS300 car code reader supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN. It is compatible with 99% OBDII-Compliant vehicles, passenger cars or light trucks. For OBD2 cars, usually, post 1996 for US market, post 2006 for EU market and post 2009 for Asian market. It comes with a 12-month warranty and free lifetime technical support. If you need any technical support, please feel free to contact us.

Best Sensor Kitchen Trash Can

2,447 Reviews

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.

4,537 Reviews

AP1822F 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side, Preventing Damage to Wires

DESIGN: Our socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots
QUALITY:This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. Apeixoto offers a full line of Oxygen Sensor tools including our complete AP1822F Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
FUNCTION: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
FEATURES:Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors,Use with any 3/8 inch drive ratchet or breaker bar,Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
LIFETIME WARRANTY - This socket comes with a lifetime warranty. If the part ever fails simply contact us for a replacement for FREE.

3,186 Reviews

TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749

Removes and installs oxygen sensors on vehicles with computer-controlled engines
Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
Use with any 3/8 inch drive ratchet or breaker bar
High-performance chrome molybdenum steel construction

6,674 Reviews

ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket - Wire Gate Accesses Sensor from Side, Preventing Damage to Wires

DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. The 6-point beveled nose of this 7/8-Inch (22mm) socket fits oxygen sensors on a wide variety of vehicles. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots. For added leverage, you can use it with your 3/8-inch breaker bar or ratchet.
QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time!
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Offset Oxygen Sensor Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, weâ€re proud to help this great organization."

4,423 Reviews

TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket | 4929

Removes and installs oxygen sensors on vehicles with computer-controlled engines
Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
Side cutout prevents damage to wires
Use with any 3/8 in. drive ratchet or breaker bar
Constructed from drop forged, heat treated, chrome vanadium steel

1,818 Reviews

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
3 types of universal socket wrenchs cover various situations of oxygen sensor location
6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads

598 Reviews

7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.
【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut.
【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
【USE】 Built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
【Service】100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.

1,539 Reviews

Oxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket

QUALITY - Constructed from drop forged heat-treated chrome-vanadium steel (CR-V) for strength and longevity; Black phosphate finish for corrosion resistance.
SIZE - Fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet.
DISIGN FEATURES- The size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires
100% Brand new and Never used This Genuine Part Is guarantee By Factory Warranty
WARRANTY - Whether it is the quality of the products or your payment, which will always provide customer support.If either actuator fails simply contact us for a replacement.

215 Reviews

Marsflex Oxygen O2 Sensor 234-4622 13355 Downstream Heated Compatible with Toyota Camry Avalon Sienna 4Runner RAV4 Solara Matrix Lexus ES300 Pontiac Vibe,250-24360 Replacement

Cautions: Please check your vehicle fitment carefully in the product description to avoid any wrong purchase.Please check your part pictures with our pictures, especially the plug, it must be completely same. Or it will not fit your car.
Application: Marsflex Oxygen O2 Sensor 234-4622 Compatible for Toyota Camry Hybrid 2007-2017,Camry LE 1994-1999 2004-2006 2010-2017,Camry SE 1994-1996 2004-2006 2010-2017,Camry XLE 1994-2000 2004-2017,Avalon Sienna 4Runner RAV4 Solara Matrix Lexus ES300 Pontiac Vibe.
Advantage: Made of high-quality materials, strong durability, to ensure service life, Marsflex O2 Sensor can improve engine performance and fuel economy, extend Catalytic Converter life.
Easy Installation:Marsflex oxygen sensor 234-4622 total length 16.57 inch. Manufactured to OE specification fit form and function, durable and easy installation.
Warranty: 1-YEAR WARRANTY. ALL Marsflex oxygen sensors are extensively tested during manufacturing to guarantee quality, reliability,and above all,always meet or exceed the original equipment specifications.

Related Products:

Last update 2023-02-03. Price and product availability may change.